Is there a way to change how far springs send you?

[Geek]

I'm in the middle of making my first big custom stage (hopefully to be released sometime soon), and I added a Red Spring so that the player was able to reach an area at the start. The problem is, the spring sends the player way higher than I would like. I tried changing it to a Blue Spring but it didn't send the player high enough. I even wondered (and checked) if I had somehow layered 2 springs on top of each other, but no. I tried looking in the wiki but didn't find anything on it.
Is there a way to change how far springs send you or is that impossible?

Post automatically merged: Sep 22, 2025

No this was a stupid question I can't believe I asked this, I there's no way

 

[Jammin']

I'm pretty sure that if you're using Ultimate Zone Builder you can change the size of the spring which also changes the power of said spring. If you're using regular ZB, you can try putting a floating spring above the one on the ground to adjust the gained height a little. If you don't want to do that, you've got your hands tied because the only other option is changing the level design around the power of a certain spring.
Keep in mind that the blue spring is the least powerful spring, the red spring is the most powerful and the yellow spring is an in-between.

 

[Geek]

I'm pretty sure that if you're using Ultimate Zone Builder you can change the size of the spring which also changes the power of said spring. If you're using regular ZB, you can try putting a floating spring above the one on the ground to adjust the gained height a little. If you don't want to do that, you've got your hands tied because the only other option is changing the level design around the power of a certain spring.
Keep in mind that the blue spring is the least powerful spring, the red spring is the most powerful and the yellow spring is an in-between.

I didn't know there was an Ultimate Zone Builder