Confirmed [OpenGL] CEZ1 has Invisible Floor, flickering wall

Status
Not open for further replies.
ZMoeJiP.png

This problem only appears on OpenGL; software is perfect. The floor in this particular sector is consistently invisible, and the wall flickers depending on camera angle.

Using 2.1.2, built from source on GitHub for Linux 64-bit.

System Specs if they matter:
Code:
$ inxi -F
System:    Host: ********** Kernel: 3.8.0-35-generic x86_64 (64 bit) Desktop: N/A Distro: Peppermint Four
Machine:   Mobo: ASUSTeK model: M5A78L-M LX PLUS version: Rev X.0x Bios: American Megatrends version: 1302 date: 11/14/2012
CPU:       Quad core AMD Phenom II X4 965 (-MCP-) cache: 2048 KB flags: (lm nx sse sse2 sse3 sse4a svm) 
           Clock Speeds: 1: 800.00 MHz 2: 800.00 MHz 3: 800.00 MHz 4: 800.00 MHz
Graphics:  Card: NVIDIA G92 [GeForce 9800 GT] X.Org: 1.13.3 driver: nvidia Resolution: 1920x1080@60.0hz 
           GLX Renderer: GeForce 9800 GT/PCIe/SSE2 GLX Version: 3.3.0 NVIDIA 331.38
Audio:     Card-1: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) driver: snd_hda_intel
           Card-2: Fry's driver: USB Audio
           Sound: Advanced Linux Sound Architecture ver: k3.8.0-35-generic
Network:   Card-1: Realtek RTL8111/8168 PCI Express Gigabit Ethernet controller driver: r8169 
           IF: eth1 state: down mac: *********
           Card-2: Ralink RT2800 802.11n PCI driver: rt2800pci 
           IF: wlan0 state: up mac: **********
Drives:    HDD Total Size: 250.1GB (66.7% used) 1: id: /dev/sda model: ST3250410AS size: 250.1GB 
Partition: ID: / size: 214G used: 156G (77%) fs: ext4 ID: swap-1 size: 17.18GB used: 0.00GB (0%) fs: swap 
RAID:      No RAID devices detected - /proc/mdstat and md_mod kernel raid module present
Sensors:   System Temperatures: cpu: 41.0C mobo: 35.0C gpu: 39C 
           Fan Speeds (in rpm): cpu: 778 sys-1: 1520 
Info:      Processes: 186 Uptime: 1:20 Memory: 1393.8/7984.8MB Client: Shell inxi: 1.8.4
 
Last edited by a moderator:
ZMoeJiP.png

This problem only appears on OpenGL; software is perfect. The floor in this particular sector is consistently invisible, and the wall flickers depending on camera angle.

Using 2.1.2, built from source on GitHub for Linux 64-bit.

System Specs if they matter:
Code:
$ inxi -F
System:    Host: ********** Kernel: 3.8.0-35-generic x86_64 (64 bit) Desktop: N/A Distro: Peppermint Four
Machine:   Mobo: ASUSTeK model: M5A78L-M LX PLUS version: Rev X.0x Bios: American Megatrends version: 1302 date: 11/14/2012
CPU:       Quad core AMD Phenom II X4 965 (-MCP-) cache: 2048 KB flags: (lm nx sse sse2 sse3 sse4a svm) 
           Clock Speeds: 1: 800.00 MHz 2: 800.00 MHz 3: 800.00 MHz 4: 800.00 MHz
Graphics:  Card: NVIDIA G92 [GeForce 9800 GT] X.Org: 1.13.3 driver: nvidia Resolution: 1920x1080@60.0hz 
           GLX Renderer: GeForce 9800 GT/PCIe/SSE2 GLX Version: 3.3.0 NVIDIA 331.38
Audio:     Card-1: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) driver: snd_hda_intel
           Card-2: Fry's driver: USB Audio
           Sound: Advanced Linux Sound Architecture ver: k3.8.0-35-generic
Network:   Card-1: Realtek RTL8111/8168 PCI Express Gigabit Ethernet controller driver: r8169 
           IF: eth1 state: down mac: *********
           Card-2: Ralink RT2800 802.11n PCI driver: rt2800pci 
           IF: wlan0 state: up mac: **********
Drives:    HDD Total Size: 250.1GB (66.7% used) 1: id: /dev/sda model: ST3250410AS size: 250.1GB 
Partition: ID: / size: 214G used: 156G (77%) fs: ext4 ID: swap-1 size: 17.18GB used: 0.00GB (0%) fs: swap 
RAID:      No RAID devices detected - /proc/mdstat and md_mod kernel raid module present
Sensors:   System Temperatures: cpu: 41.0C mobo: 35.0C gpu: 39C 
           Fan Speeds (in rpm): cpu: 778 sys-1: 1520 
Info:      Processes: 186 Uptime: 1:20 Memory: 1393.8/7984.8MB Client: Shell inxi: 1.8.4

I wished you used the in-game screenshot, it would include the pos in the map...
 
I wished you used the in-game screenshot, it would include the pos in the map...

Sorry. This is the first turn after the spawn. Coordinates while standing on the invisible floor are X: 1415, Y: -22001, Z: 1136

EDIT:
Can not reproduce using srb2win in Wine.
Can not reproduce using official Linux 32-bit client.
Can reproduce in official Linux 64-bit client.

This problem seems to be specific to 64-bit Linux.
 
Last edited:
I know it's been two years now, but does this bug still occur for Linux 64-bit? I do wonder if any changes to the OpenGL renderer's code since 2.1.2 may have fixed this or not (especially since we had to add support for slopes to it), but it's hard to tell since I haven't got Linux of any sort to test with. =P
 
2.1.2 version?

ZMoeJiP.png

This problem only appears on OpenGL; software is perfect. The floor in this particular sector is consistently invisible, and the wall flickers depending on camera angle.

Using 2.1.2, built from source on GitHub for Linux 64-bit.

System Specs if they matter:
Code:
$ inxi -F
System:    Host: ********** Kernel: 3.8.0-35-generic x86_64 (64 bit) Desktop: N/A Distro: Peppermint Four
Machine:   Mobo: ASUSTeK model: M5A78L-M LX PLUS version: Rev X.0x Bios: American Megatrends version: 1302 date: 11/14/2012
CPU:       Quad core AMD Phenom II X4 965 (-MCP-) cache: 2048 KB flags: (lm nx sse sse2 sse3 sse4a svm) 
           Clock Speeds: 1: 800.00 MHz 2: 800.00 MHz 3: 800.00 MHz 4: 800.00 MHz
Graphics:  Card: NVIDIA G92 [GeForce 9800 GT] X.Org: 1.13.3 driver: nvidia Resolution: 1920x1080@60.0hz 
           GLX Renderer: GeForce 9800 GT/PCIe/SSE2 GLX Version: 3.3.0 NVIDIA 331.38
Audio:     Card-1: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) driver: snd_hda_intel
           Card-2: Fry's driver: USB Audio
           Sound: Advanced Linux Sound Architecture ver: k3.8.0-35-generic
Network:   Card-1: Realtek RTL8111/8168 PCI Express Gigabit Ethernet controller driver: r8169 
           IF: eth1 state: down mac: *********
           Card-2: Ralink RT2800 802.11n PCI driver: rt2800pci 
           IF: wlan0 state: up mac: **********
Drives:    HDD Total Size: 250.1GB (66.7% used) 1: id: /dev/sda model: ST3250410AS size: 250.1GB 
Partition: ID: / size: 214G used: 156G (77%) fs: ext4 ID: swap-1 size: 17.18GB used: 0.00GB (0%) fs: swap 
RAID:      No RAID devices detected - /proc/mdstat and md_mod kernel raid module present
Sensors:   System Temperatures: cpu: 41.0C mobo: 35.0C gpu: 39C 
           Fan Speeds (in rpm): cpu: 778 sys-1: 1520 
Info:      Processes: 186 Uptime: 1:20 Memory: 1393.8/7984.8MB Client: Shell inxi: 1.8.4

Where did you get srb2 2.1.2?

Edit: Noticed that are writed on the thread.
 
I know it's been almost another 2 years now, but just letting you know this issue is still a thing and I haven't been able to figure it out. Also effects the cave after the spring chain in GFZ2.
 
Status
Not open for further replies.

Who is viewing this thread (Total: 1, Members: 0, Guests: 1)

Back
Top